Freepbx failed ext registrations

eamong121's picture
Posted March 10th, 2010 by eamong121 (tadpole)

Hi Guys

Newbe here

I have Ubuntu server 9.10 with asterisk, freepbx ( 2.7.0) and a2billing (1.6.0) new installation

I created ext through a2billing/admin which is ok when i set up xlite with account details.
when i create ext through freepbx i can see it in database under ASTERISK table DEVICES but i get a Registration error 404 in xlite.

I am connected on the same lan so no firewall and i dont see anything when i run asterisk -vvvvr

Does Frrepbx create additional-extensions.conf that i need to include in asterisk or do i need to add a connection to the Database

Any ideas.


__________________


‹ installing a TDM card into freePBX Queues on a 2.5.1.0 release ›

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

After you create the

blanchae's picture
On March 10th, 2010 blanchae (tadpole) said:

After you create the extension (submit), open it up again and change nat=yes to nat=no. Sometimes that screws things up. Make sure that the extension/secret matches in both the xlite and FreePBX. From the Asterisk CLI> "sip show users" will show the extensions and their passwords.


__________________

Eugene Blanchard
Author of PBX in a Flash for Newbies and Introduction to Data Communications


Freepbx failed ext registrations

eamong121's picture
On March 12th, 2010 eamong121 (tadpole) said:

I got it sorted i needed to include sip_additional.conf to the sip.conf file

now i have to figure out why trunk/route does not work


I link two pbx asterisk

albpad21's picture
On March 16th, 2010 albpad21 (tadpole) said:

I link two pbx asterisk, only one side connects the trunked I sip on the other side can not, do the same in both exactament pbx, have identical versions on both sides of the 2.7 0 I could help.